iLead, the control center of iSolution, is a custom-designed controller for iRock, iShow, iMove, iColor, and iBeat. Featuring consistent DMX configuration with iSolution lights, the professional, versatile DMX controller simplifies the troublesome set-up procedures and makes operation easy. iLead enables DJs to have an instant access to control the fantastic lighting fixtures, just like its name iLead-lead iSolution to the richest lighting shows.

Set-up

In order to use iLead, please link iSolution lights, like iRock, iShow, iMove, etc., together in a daisy chain. The more channels the lighting fixtures have, the closer the units have to be put in the beginning of the chain. iLead have two DMX outputs and two easy controller ( Master / Slave ) outputs  which enable iLead to link all iSolution lightings together. Under DMX operation, iLead can control 24 lights.
Up to 8 channels per fixture.
DMX Address setting

The channel sequence ( DMX configuration ) of iLead is Pan / Tilt / Shutter / Gobo / Color / Rotating Gobo / Dimmer / Focus. And you will find iSolution lighting products have the same, consistent DMX configuration.
You can set up light’s DMX address remotely by iLead controller. No need to climb up to the ceiling to change light’s address.
For the lightings in the chain, you can designate the fixture’s number from I-24；and the fixtures at different positions can be designated with the same fixture numbers. Each chain on can have maximum 64 lightings linked together.
Programming

To choose the lights in the chain you want to control, just press button “ Scanners “.  You can control Movement ( pa nl tilt ), Shutter, Gobo, Color, Rotating, Gobo, Dimmer, and Focus by pressing the relevant buttons.
A.) Edit a scene
For position Pan/Tilt, you can use Joystick or Sliders ( Speed for pan I Xfade for tilt) to locate the positions.
For choosing shutter, gobo, color, rotating gobo, dimmer, and focus, press the 123 buttons ( every button with 2 pages for a total of 24 different values) or move X fade slider to select what you want.

B.) Create a show
Combine many scenes together to become a show, a show can contain 48 scenes. You can save 24 shows in the iLead controller.
12 preset shows for yourinstant show editing. You can choose shutter, gobo, color, dimmer, etc., for the show. The shows are with adjustable fade time, speed, range, and position setting.

Operation

After saving the shows, press “ light show” button to trigger the shows. The shows can run under three different modes Auto, Sound, or Manual. Under Auto mode, you can adjust speed and fade time.
The saved shows can run at the same time or run one by one.
Add “ override” button to meet venue’s special purposes, like override some certain lights to act as follow spots.
Add “ Blackout “ button. When the LED is on, it’s in blackout status；LED off, it’s in DMX status; LED blinking, it’s in Stand Alone operation.
Stand Alone operation

Incorporate 2 extra easy controllers for immediate pre-programmed shows. All the iSolution lightings can be linked to the 2 DMX outputs on iLead controller or to the 2 stand Alone outputs, performing dynamic lighting shows triggered by Easy Controller.
Hold on “ Blackout” for 3 seconds to activate stand alone operation.
Value-Added function

Add “ Fog” button for instant access to fog machine.
Add “ Strobe” button for instant access to iBeat 5 Strobe. Strobe speed is adjustable. Hold on the “Strobe” button and press “ 1-12” buttons at the same time to change speed.
MIDI controllable or Sound activated.