〖1〗System Setup
1/ device id set
2/ Password Setup
3/ power on set(All Mute / Keep in last state)
4/ backlight set(Keep On / 10s )
5/ System information
〖2〗Input channel option:
1 / Mute:every channel have input mute(ON/OFF)
2 / Delay:longest delay 1000 ms
3 / Polarity: Pol (+) or Pol (-)
4 / Parameter Equalizer:every channel can set 6 parameter EQ(EQ—EQ6)
In Parameter
Frequency point:20Hz-20HHz
Bandwidth:0.05 ~ 3 Oct/w
Gain:-20dB ~ +20dB
〖3〗Output channel function option:
1/ Input choice:Each output can choose difference input channel(A , B, C, D channel or non channel),Each output can also choose difference channel assemble.
2/ Mute:each channel have output mute function,MUTE(ON/OFF)
3/ Output Gain:-12dB ~ +12dB Step distance 0.1dB
4/ Output delay:longest delay 1000 ms, can display in the computer by M or Ft.
5/ Polarity: Pol (+) or Pol (-)
6/ Crossover filter type:Link-Ril / Buttworth / Bessec
Frequency point:20Hz ~ 20KHz
Slope:12dB、18dB、24dB、48dB
7/ Limiter:
Threshold:-20dBu ~ 20dBu
Attack:0.3ms-100ms
Release : can be set to start time’s 2, 4 , 6, 8 , 16 or 32 times
8/ Parameter Equalizer:in Paramerer
Frequency point: 20Hz ~ 20KHz
Bandwidth:0.05 ~ 3 Oct/w
Gain:-20dB~+20dB
In Lo-Shelf and Hi-Shelf
Frequency point:20Hz ~ 20KHz
Gain: -20dB~+20dB
Slope:6dB、12dB
〖4〗Key-Press function
1/ X-Over: Enter high-pass low-pass adjust(useful when adjust output channel, inefficacy when adjust input channel)
2/ Eq: Enter equalizer adjust.
3/ Dynamics: Enter limiter adjust(useful when adjust output channel, inefficacy when adjust input channel)
4/ Polarity: Phase position choosen
5/ Gain: gain and input channel choose key (useful when adjust output channel, inefficacy when adjust input channel)
6/ Delay: Enter delay function
7/ Load: Transfer saved program.
8/ Save: Save revision program
9/ System: System setup
10/ MUTE/EDIT:Mute or Edit(press shortly enter mute function, red light display.press longest enter edit function, green light display.)
11/ Enter/Setup