The DI.CO SYS amplifier can be connected to a maximum of 30 DI.CO microphone stands, and is equip- ped with a special microphone preamplifier.
The “SYSTEM LINK” terminal strip makes it possible to create systems with a higher number of participants’ microphone stands (max. 150). The universal “MICRO-LINE” input can be used for connected a low impedance dynamic microphone (30-600 Ω), or an audio source with high level signal output (e.g. AM/FM tuner, cassette player, CD player, etc.). By means of the “VOICE/MUSIC” band selector, it is possible to adapt the frequency response of the “MICRO-LINE IN” input to the type of signal used (line or microphone signal).
Features
-
Conference system with built-in 30 W amplifier for audio renforce diffusion
-
DESK IN" inputs for connecting 30 microphone stands, which can be divided into two branches, with volume control.
-
Terminals for interconnecting multiple DI.CO SYS amplifiers to increase the number of DI.CO microphone stands in the system (up to 150).
-
1 universal "MICRO-LINE" input with independent volume control
-
1 "MAIN IN" input, 1 "TAPE IN" input with independent volume control
-
1 "PRE OUT" output. 1 "AUX OUT" output. 1 "TAPE OUT" output with volume control
-
Outputs for constant voltage and constant impedance speakers
-
"VOICE/MUSIC" band selector
-
Final stages automatically protected against overload and short circuits
-
Dual power supply in alternating current
-
Removable front knobs with closure caps
-
Front panel LEDs indicate the device state, "OVERLOAD" and "ON"
Applications
-
Small conference hall
-
Cuncil chambers
-
Mobile installations
Amplifier Specifications
-
Power output:30 W rms
-
Frequency Response:80 Hz ÷ 12 kHz
-
Signal/noise rate:(MIC) > 60 dB; (LINE) > 70 dB
-
Crosstalk:(MIC) > 60 dB; (LINE) > 70 dB
Input Section
-
Input sensitivity MIC:(MIC) 58 dBu
-
Input sensitivity LINE:20 dBu
-
Input sensitivity AUX:0 dBu
-
Input impedance MIC:2 kΩ
-
Input impedance LINE:47 kΩ
-
Input impedance AUX:47 kΩ
-
Controls:Desk, Micro-Line, Tape volume control
Output Section
-
Output Level:2.5 dBu
-
Output impedance:600 Ω
-
Output Loudspeaker Low impedance:8 Ω
-
Output Loudspeaker Constant voltage:100 V ; 70 V
-
AUX output:2.5 V 600 Ω
-
Protections:Overload, Short Circuits
Power Requirements
-
Operating voltage:115÷230 ~ 50 / 60 V ˜ Hz
-
Power (consumption):70 W
Physical Specifications
-
Height:88 / 3.46 mm/inch
-
Width:433 / 17.05 mm/inch
-
Depth:315 / 12.40 mm/inch
-
Net weight:6.2 / 13.67 kg/lbs
Shipping Information
-
Package height:185 / 7.28 mm/inch
-
Package width:480 / 18.89 mm/inch
-
Package depth:405 / 15.94 mm/inch
-
Shipping weight:7.9 / 17.41 kg/lbs