The P2110 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected.
The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable.
The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.
The system features a selectable line transformer for 70 - 100 Volt applications. P 2110 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features
-
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
-
Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
-
Stainless steel bracket
-
One 10" high-output LF transducer with 2" voice coil
-
One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
-
90° x 40° constant directivity horn
-
Built in passive crossover and selectable line transformer
-
10° X 20° enclosure sides for array configurations
-
Active Mosfet Compression Driver Protection
-
LICC (Low Impedance Compensated Crossover) network
-
12 brass suspension points (M8)
Applications
-
Outdoor Sound Reinforcement in small and medium spaces
-
High-Level AV Playback
-
Flown cluster configurations
-
Large speech systems
-
Music Sound Reinforcement
Acoustical Specifications
-
Frequency Response -10 dB:95 Hz ÷ 20 kHz
-
Max SPL @ 1m:118 dB
-
Horizontal coverage angle:90°
-
Vertical coverage angle:40°
-
Directivity index; Q:11
-
System Sensitivity:95 dB
-
Nominal Impedance:16 Ω
-
Power Handling:200 W
-
Peak Power Handling:800 W
-
Recommended Amplifier:400
-
Protections:Dinamyc
-
Crossover frequencies:2000 Hz
Transducers
-
Compression Driver:1.5" HF driver, 1" voice coil
-
Nominal Impedance:8 Ω
-
Input Power Rating:25 W AES
-
Sensitivity:106 dB
-
Woofer:10" woofer, 2.5" voice coil
-
Nominal Impedance:16 Ω
-
Input Power Rating:180 W AES
-
Sensitivity:95 dB
Input Section
-
Input connector:5m, 4-adriges Neopren Kabel
-
Constant voltage transformer:70/100
-
Power Selection:70V/30W ,15W , 100V/60W, 30W
Cabinet
-
Cabinet Material:Polyethylene rotomoulded
-
Hardware:12 x M8 inserts+ U-brackets and pair of spacers
-
Grille (fabric backing):Custom perforated aluminium grille with open-cell fiber and water repellent woven
-
Colour:Grey
Physical Specifications
-
Height:350 / 13.78 mm/inch
-
Width:350 / 13.78 mm/inch
-
Depth:320 / 12.60 mm/inch
-
Net Weight:13.5 / 29.75 kg/lbs