The P2110 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.

The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected.

The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable.
The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.

The system features a selectable line transformer for 70 - 100 Volt applications. P 2110 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).

Features

• Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
• Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
• Stainless steel bracket
• One 10" high-output LF transducer with 2" voice coil
• One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
• 90° x 40° constant directivity horn
• Built in passive crossover and selectable line transformer
• 10° X 20° enclosure sides for array configurations
• Active Mosfet Compression Driver Protection
• LICC (Low Impedance Compensated Crossover) network
• 12 brass suspension points (M8)

Applications

• Outdoor Sound Reinforcement in small and medium spaces
• High-Level AV Playback
• Flown cluster configurations
• Large speech systems
• Music Sound Reinforcement

Acoustical Specifications

• Frequency Response -10 dB:95 Hz ÷ 20 kHz
• Max SPL @ 1m:118 dB
• Horizontal coverage angle:90°
• Vertical coverage angle:40°
• Directivity index; Q:11
• System Sensitivity:95 dB
• Nominal Impedance:16 Ω
• Power Handling:200 W
• Peak Power Handling:800 W
• Recommended Amplifier:400
• Protections:Dinamyc
• Crossover frequencies:2000 Hz

Transducers

• Compression Driver:1.5" HF driver, 1" voice coil
• Nominal Impedance:8 Ω
• Input Power Rating:25 W AES
• Sensitivity:106 dB
• Woofer:10" woofer, 2.5" voice coil
• Nominal Impedance:16 Ω
• Input Power Rating:180 W AES
• Sensitivity:95 dB

Input Section

• Input connector:5m, 4-adriges Neopren Kabel
• Constant voltage transformer:70/100
• Power Selection:70V/30W ,15W , 100V/60W, 30W

Cabinet

• Cabinet Material:Polyethylene rotomoulded
• Hardware:12 x M8 inserts+ U-brackets and pair of spacers
• Grille (fabric backing):Custom perforated aluminium grille with open-cell fiber and water repellent woven 
• Colour:Grey

Physical Specifications

• Height:350 / 13.78 mm/inch
• Width:350 / 13.78 mm/inch
• Depth:320 / 12.60 mm/inch
• Net Weight:13.5 / 29.75 kg/lbs