Since its introduction, the impression has taken the world by storm and set a standard for LED wash lighting. Innovation rules in this fixture:
Smaller - with no base unit and able to be placed anywhere without being obtrusive and allowing more lights to be packed into smaller truck spaces.
Lighter - with a weight of just 7.5 kg / 16 lbs. allows the impression to be mounted in many more places without having to sacrifice for a lower output fixture.
Faster - solid state LED’s give instant lighting changes to match with video and it’s compact size and weight, the impression can move at incredible speeds too – 660 degrees of pan in just 2 seconds.
Brighter - 90 powerful K2 LED’s ensure pure bright light in every version – RGB or white – with output levels exceeding that of 575W discharge fixtures. And that’s not all; the impression produces beautiful smooth even fields of color when mixing through all color shades in the RGB version, or from one color temperature to another in the white versions.
All units come as standard with 10 degree fixed beam optics, but both 25 degree and 40 degree lenses area available, along with other accessories such as honeycombs and protection domes for outdoor use.
All versions are available with motorized pan and tilt or as static units if they just need to be locked off into position, or operated manually. There is even a recessed version of the impression available for mounting into applications where suspended ceilings or raised floors are used.
All impression fixtures are available to purchase in a flight case direct from the factory. Small and compact, these cases provide ultimate protection for the impression and contain storage space for clamps, lenses, cables and other accessories.
Light Source
additive color mixing
90 Luxeon K2 high power LED's
average service life: 50.000 hours
Available Versions
RGB - 30 red, 30 green, 30 blue LED's
WCC - 30 warm white (3200K), 60 cold white (7200K), allow continuously adjustable color temperature
WWC - 60 warm white (3200K), 30 cold white (7200K), allow continuously adjustable color temperature
CCA - 60 cold white (7200K), 30 amber LED’s
all versions available as either motorized or static fixture
Recessed Version
recessed version available for mounting in suspended ceilings
all versions available as either motorized or static fixture
Optical System
highly efficient collimator cluster
interchangeable lens carrier with 10° beam angle (25° and 40° optional)
wave lengths are optimized for maximum visible color gamut
integrated spill ring
Movement
8 or 16 bit resolution selectable
position feedback
maximum speed: 660° pan in 2 seconds, 300° tilt in 1 second
high precision stepper motor control
Shutter/ Dimmer
strobe-effect with variable speed between 1-10 flashes per second, random-strobe, pulse effects
continuous dimmer 0-100%
Control
DMX-512 protocol
three DMX modes available, using up to 14 channels
backlit graphic-LCD menu with 4 illuminated buttons
very quiet, temperature controlled ventilation system
convection cooling possible if needed
over-temperature protection
color calibration feature
internal color-presets
Power Supply
power consumption: 350 VA (Watt)
power input: 100-240 V AC, 50-60Hz (wide range input)
fuse protection: Micro-fuse 5x20mm, T 4A
Connectors
DMX: XLR 3 pin
mains voltage: Neutrik Powercon
Approvals
ETL Safety Approved
US Safety Approved: UL 1573 and UL 8750
Canadian Safety Approved: CAN/CSA C22.2 No. 166
Operating Conditions
maximum ambient temperature: 45°C / 113°F
Mounting Options
omega bracket attachment
2 attachment points for safety wire
upright : tripod (supplied) with brackets for ratchet belt
hanging (vertical): M10 nut with lockable installation position for a half coupler or other clamp
hanging (horizontal): adjustable bar for sideways truss installation (optional)
Housing Colors
standard colors are black, silver & white
for other colors please contact sales department
Shipping
cardboard box
4 way tourpack (complete with half couplers and additional lenses) in flight case
6 way tourpack (complete with half couplers and additional lenses) in flight case
Dimensions
length x width x height (head vertical): 145 x 340 x 370 mm / 5.7 x 13.4 x 14.6 inches
Net Weight
7.5kg / 16.5 lbs.