The multicell LF horn configuration provides seamless inter-element coupling of the LF driver up to the crossover point.
HF section consists of one 1.75 inch annular diaphragm driver coupled to a proprietary waveguide.
The box configuration generates a symmetrical 90 degree horizontal coverage with no apparent lobes in its entire frequency range.
Each of the system elements can be curved up to 16 degrees without breaking the inter-element acoustic coupling.
M28LA line source element is made of premium grade Baltic birch plywood to provide maximum acoustical and mechanical integrity.
The system is designed to provide the specified performance in a group of minimum 4 boxes.
Each element has a nominal 16 ohm impedance and the system is driven by a dedicated PKN XE6000 amplifier which provides clean undistorted power with a significant headroom and excellent system protection.
Specification
-
Frequency response (-3db): 90Hz-20KHz (M28LA DSP settings)
-
Nominal directivity (-6db): Horizontal: 90 degree symmetrical. Vertical: Deployment dependant.
-
Maximum system SPL: 147db (M28LA DSP settings) calculated for 4 boxes based on 106db 1W/1m sensitivity per element.
-
RMS handling capacity: LF: 600W per element. HF: 80W per element.
-
Components: LF: 2×8 inch water resistant. HF: 1×1.75 inch annular diaphragm compression driver
-
Nominal impedance: Passive 16ohm
-
Rigging: Polyester powder coated steel. Angle increments: 0,2,4,6,8,10,12,14,16
-
Physical: WxHxD 700x290x500mm
-
Weight: 32kg
-
Material:Baltic birch plywood.
-
Connectors: 2x Neutrik Nl4 Speakon
-
Finish: Black textured water based coating