Total:
Shopping cart
Shopping cart is empty
0 product
Login
User name
Password
Forgot your password ?
New customer?
Register and get all the benefits: Personalized product recommendations. The opportunity to save items in your cart between visits. And more. Don't miss out!
Register
Home AV Integration A/V Cables & Connectors AXI 22 AT D WALLPLATE BLACK EXTRON
AXI 22 AT D WALLPLATE BLACK EXTRON
Product number: 164835
No one voted yet.

2 Input, 2 Output Audio Expansion Interface with Dante - Decora Wallplate

The Extron AXI 22 AT D is a single-gang Decora®-style audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two XLR audio inputs and switchable 48 volt phantom power for connecting and powering condenser microphones, plus gain controls for each input. The AXI 22 AT D also features two line outputs on the back for routing any two Dante channels from the network to an amplifier, or connecting into an optional secondary wallplate with two XLR outputs or RCA outputs. The AXI 22 AT D interfaces with any Dante-equipped audio processor, such as an Extron DMP 128 AT, over a standard local area network, and can be powered through PoE. This allows a single network cable connection for bidirectional audio and power from a central equipment rack.

0.00 €
Inc. VAT
Out of stock
Qty.
Add to cart
Share via:

Features

  • Two mic/line inputs on XLR connectors for transmitting audio to a Dante™ network
  • Two line outputs on a rear panel captive screw connector receive audio from a Dante network
  • Dante audio networking provides a wide range of expansion capabilities
  • Studio grade 24-bit analog-to-digital and digital-to-analog converters selectable up to 96 kHz
  • Input gain and phantom power controls located behind cover plate
  • XLR audio inputs for direct microphone connection

Specification

Audio
   Frequency response  20 Hz to 20 kHz, ±0.3 dB
   THD + Noise  <0.01% @ 1 kHz, at maximum level
   S/N
      Analog to digital  >95 dB, 20 Hz to 20 kHz, at full-scale output, unweighted
      Digital to analog  >95 dB, 20 Hz to 20 kHz, at maximum balanced output, unweighted
   Crosstalk  <-90 dB @ 1 kHz, fully loaded
 
Audio input
   Number/signal type  2 mono, mic/line, balanced/unbalanced
   Connectors  2 female XLR connectors, 3-pin
   Impedance  >10k ohms unbalanced/balanced
   Nominal level  +4 dBu when level is set to 0 dB gain; adjustable from -60 dBu to +4 dBu
   Maximum level  >+21 dBu at rated THD+N when input gain is set to 0 dB
   Noise level  <-120 dBV (1 µ Vrms) at 45 dB gain
   Input gain adjustment (mic)   0 dB to +45 dB, adjustable per input in 5 dB steps
   CMRR  >65 dB @1 kHz
   Mic phantom power  +48 VDC ±10%. Can be switched on or off.
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output
   Number/signal type  2 mono (or 1 stereo), balanced/unbalanced
   Connector  (1) 3.5 mm captive screw connector, 6 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Nominal level  -10 dBV or +4 dBu (1.23 V)
   Maximum level (Hi-Z)  >+15 dBu balanced or >+9 dBu unbalanced
 
Audio processing
   A/D conversion  24 bit, selectable sampling rate
 
AT ports — audio transport
   Transmission type  Dante
   Connector  (1) RJ-45 to Dante interface
   Inputs  2 channels Rx
   Outputs  2 channels Tx
   Audio format  24 bit uncompressed, selectable at 44.1, 48, 88.2, and 96 kHz sampling rate
   Latency  Deterministic, based on user selections: 1.0 ms (default), 2.0 ms, 5.0 ms
 
General
   Power input requirements  12 VDC or Power over Ethernet (PoE 802.3at)
   Power supply (optional)  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
      Power consumption   
         Device  4.5 watts
         Device and power supply  5.9 watts
   Power injector (PoE) — XTP PI 100
      Power consumption   
         Device  5.3 watts
         Device and power injector  8.3 watts
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Thermal dissipation   
      Power supply (optional)   
         Device  12.0 BTU/hr
         Device and power supply  16.6 BTU/hr
      Power injector (PoE) — XTP PI 100
         Device  14.6 BTU/hr
         Device and power injector  25.1 BTU/hr
   Furniture or wall mount  ​Yes, with 1-gang wall box or mud ring
   Enclosure type  Metal
   Faceplate dimensions  2.6" H x 1.3" W x 0.3" D
(6.6 cm H x 3.3 cm W x 0.6 cm D)
(Depth excludes connectors.)
   Device dimensions  2.6" H x 1.7" W x 2.2" D
(6.6 cm H x 4.3 cm W x 5.6 cm D)
(Depth excludes connectors.)
   Product weight  0.3 lbs (0.1 kg)
   Shipping weight  1 lbs (1 kg)
   DIM weight, international  0.6 lbs (0.3 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.1-010516-D7)

 

Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1517-02 2.38" (6.0 cm) 5.0" (12.7 cm) 6.0" (15.2 cm) 0.64 lbs (0.29 kg)
    60-1517-03 2.38" (6.0 cm) 5.0" (12.7 cm) 6.0" (15.2 cm) 0.64 lbs (0.29 kg)

 

Write Your review
Newsletter
Stay up to date with the latest news and great offers from Alfaudio.
© 2024 Alfa Audio. All rights reserved.
developed by Artistika