|
Audio |
|
Frequency response |
20 Hz to 20 kHz, ±0.3 dB |
|
THD + Noise |
<0.01% @ 1 kHz, at maximum level |
|
S/N |
|
Analog to digital |
>95 dB, 20 Hz to 20 kHz, at full-scale output, unweighted |
|
Digital to analog |
>95 dB, 20 Hz to 20 kHz, at maximum balanced output, unweighted |
|
Crosstalk |
<-90 dB @ 1 kHz, fully loaded |
|
|
|
Audio input |
|
Number/signal type |
2 mono, mic/line, balanced/unbalanced |
|
Connectors |
2 female XLR connectors, 3-pin |
|
Impedance |
>10k ohms unbalanced/balanced |
|
Nominal level |
+4 dBu when level is set to 0 dB gain; adjustable from -60 dBu to +4 dBu |
|
Maximum level |
>+21 dBu at rated THD+N when input gain is set to 0 dB |
|
Noise level |
<-120 dBV (1 µ Vrms) at 45 dB gain |
|
Input gain adjustment (mic) |
0 dB to +45 dB, adjustable per input in 5 dB steps |
|
CMRR |
>65 dB @1 kHz |
|
Mic phantom power |
+48 VDC ±10%. Can be switched on or off. |
|
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
|
|
Audio output |
|
Number/signal type |
2 mono (or 1 stereo), balanced/unbalanced |
|
Connector |
(1) 3.5 mm captive screw connector, 6 pole |
|
Impedance |
50 ohms unbalanced, 100 ohms balanced |
|
Nominal level |
-10 dBV or +4 dBu (1.23 V) |
|
Maximum level (Hi-Z) |
>+15 dBu balanced or >+9 dBu unbalanced |
|
|
|
Audio processing |
|
A/D conversion |
24 bit, selectable sampling rate |
|
|
|
AT ports — audio transport |
|
Transmission type |
Dante |
|
Connector |
(1) RJ-45 to Dante interface |
|
Inputs |
2 channels Rx |
|
Outputs |
2 channels Tx |
|
Audio format |
24 bit uncompressed, selectable at 44.1, 48, 88.2, and 96 kHz sampling rate |
|
Latency |
Deterministic, based on user selections: 1.0 ms (default), 2.0 ms, 5.0 ms |
|
|
|
General |
|
Power input requirements |
12 VDC or Power over Ethernet (PoE 802.3at) |
|
Power supply (optional) |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
|
Power consumption |
|
|
Device |
4.5 watts |
|
Device and power supply |
5.9 watts |
|
Power injector (PoE) — XTP PI 100 |
|
Power consumption |
|
|
Device |
5.3 watts |
|
Device and power injector |
8.3 watts |
|
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal dissipation |
|
|
Power supply (optional) |
|
|
Device |
12.0 BTU/hr |
|
Device and power supply |
16.6 BTU/hr |
|
Power injector (PoE) — XTP PI 100 |
|
Device |
14.6 BTU/hr |
|
Device and power injector |
25.1 BTU/hr |
|
Furniture or wall mount |
Yes, with 1-gang wall box or mud ring |
|
Enclosure type |
Metal |
|
Faceplate dimensions |
2.6" H x 1.3" W x 0.3" D
(6.6 cm H x 3.3 cm W x 0.6 cm D)
(Depth excludes connectors.) |
|
Device dimensions |
2.6" H x 1.7" W x 2.2" D
(6.6 cm H x 4.3 cm W x 5.6 cm D)
(Depth excludes connectors.) |
|
Product weight |
0.3 lbs (0.1 kg) |
|
Shipping weight |
1 lbs (1 kg) |
|
DIM weight, international |
0.6 lbs (0.3 kg) |
|
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
|
Regulatory compliance |
|
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Warranty |
3 years parts and labor |
|
NOTE |
All nominal levels are at ±10%. |
|
|
NOTE |
Specifications are subject to change without notice. |
|
|
(8.1-010516-D7) |