What do you do when the lighting console is still in the truck? Or when you need to address a light in the workshop? Or if you want to check the temperature sensor?
That's where Jump-Start comes in! Plug it into the DMX connector and moments later you have a display of all the important information: Start Address, Footprint, Personality, Sensors, Temperature, Voltage, Lamp Hours to mention but a few. A couple of key presses are all it takes to edit the settings. You can even plug into the entire lighting rig and auto-patch all the lights!
Have you ever stood in front of a light trying to remember which combination of channels mean 'strike'? Jump-Start is so clever that it can simply ask the light to strike or dowse or self-test.
Jump-Start also operates as a straightforward DMX tester. You can set individual channels to a level or have them ramp continuously. You can even store the channel settings to a memory.
Two 'AA' batteries power Jump-Start. Talk time is around 12 hours and Standby time is about 6 months.
Features
-
Output Protocols: DMX512-A
-
RDM V1.0 (E1.20 - 2006 ESTA Standard)
-
DMX512 Functions:
-
Rig Check - Static / Dynamic
-
Memory Check - Static any combination of channels
-
Dynamic Check - Consecutive group of channels ramping
-
RDM Functions (Get / Set):
-
Start address & personality
-
Lamp strike + power-on
-
Self test + dimmer curve
-
Pan & tilt invert & swap
-
Display brightness and invert
-
Help language
-
RDM Functions (Get):
-
Lamp hours + strikes
-
Product hours + footprint
-
Software version
-
Device reset
Specifications
-
Listing: CE FCC
-
IP Rating: Indoor use
-
Power: 2 x AA Battery
-
Height: 95 mm
-
Width: 65 mm
-
Depth: 28 mm
-
Signal Connection: XLR5 female
-
Net Mass: 0.10 kg
-
Approximate Carton Mass: 0.32 kg
-
Approximate Carton Dimensions: 220 x 180 x 120 mm
-
Volume: 4752000 mm³
-
Manufacturer: Artistic Licence Engineering Ltd
-
Country of Manufacture: The United Kingdom