Based on the well-known class D amplifier technology, D series has excellent audio integrity. It has the best audio features on the market to achieve low distortion and high dynamic range.
Features
-
Class D output circuit with even lower losses and minimal increase in average AC power, dramatically reducing AC power distribution demands compared to older, high-power amplifiers!
-
With the compact design, and compared to traditional audio amplifier, D series presents more excellent performance in a significant reduction in heat dissipation while conveying stronger power to the speaker.
-
Excellent designed flow-through air path and solid aluminum heat sinks can gain the maximum cooling!
-
Lightweight and rugged design, 1U height standard rack, particularly suitable for medium / small-site fixed installation.
Specification
-
8Ω Stereo Output Power: 1200W
-
4Ω Stereo Output Power: 2000W
-
2Ω Stereo Output Power: 3600W*
-
8Ω Bridge Output Power: 3450W
-
4Ω Bridge Output Power: 5600W*
-
Frequency response(1W,8ohms)+0/-3dB: 6.8Hz-34kHz
-
1KHz THD: 0.01—0.03%
-
S/N rate: -104dB
-
Damping factor: ＞600
-
Crosstalk: ＞70
-
Input sensitivity: 1.2V/32dB/26dB
-
Input impedance: >10KΩ balanced or unbalanced
-
Output circuitry: D
-
Front panel control: AC power switch; LED: Power (green), bridge (orange), parallel (yellow) Signal (green)-10dB (green) /-150dB (green), clipping (orange); Protect (red); volume controller
-
Rear panel control: Input Mode: Parallel (yellow), stereo (green), bridge (red);
-
Sensitivity: 26dB (red), 32dB (green), 1.2V (yellow); Low frequency processor switch: Off (yellow), open (green),
-
Input connector: XLR
-
Output connector: Neutrik Speakon
-
Cooling: 3 fans, airflow from front panel to the rear panel, Variable wind speed, according to the temperature.
-
Product dimension(mm): 483mm×364.8mm×45mm