HDMI extender while using CAT6 cable as transmission media. the transmission distance for 1080P reaches 100 meters. for 4K*2K reaches 70meters,support 3D transmission, the IR system could control the sources from the sinks or control the sinks from sources.
Products offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Features
-
One pair as a full functional module, no need for setting
-
Use single UTP LAN cable (CAT6) to substitute HDMI cable to achieve long distance transmission
-
UTP cable termination follows the standard of IEEE-568B
-
Transmission distance reaches up to 100 meters under the video format of 1080P. 70 meters for 4k*2k
-
HDMI V1.4 supported
-
HDCP compliant
-
Full HD support: 1080p@60Hz@48 b/pixels, 3D and 4Kx2K
-
With ESD protection inside
-
Mounting ears supplied
-
Transfer Bidirectional Infrared control signal together with the HDMI signal
-
RS232 Port for firmware update or RS232 control signal transmission
Specification
-
Operating Temperature Range: -5 ~ +35°C
-
Operating Humidity Range: 5 to 90 % RH (no condensation)
-
Input Video Signal: 0.5-1.0 volts p-p
-
Input DDC Signal: 5 volts p-p (TTL)
-
Video Format Supported: DTV/HDTV; 1080P/1080i/720P/576P/480P/576i/480i
-
Output Video: HDMI 1.4+HDCP
-
Output Audio: Support DTS-HD, Dolby-HD
-
Maximum Transmission Distance:
-
1080p CAT6 120 Meters
-
1080p 3D CAT6 100 Meters
-
4K*2K CAT6 70 Meters
-
Power Supply: 5V/2A DC
-
Power Consumption: 2.5Watts (Transmitter), 5 Watts (Receiver)
-
Dimensions: 105mmH×76mmW×27mmD
-
Mass (Main unit): 570g
Installation
-
Connect the HDMI input source (such as HD-DVD、PS3、STB etc. ) to transmitter.
-
Connect a CAT6 cable from RJ45 port of transmitter to RJ45 port of receiver
-
Connect the HDMI sink(such as HD-LCD、HD-DLP）to receiver
-
Connect the IR TX UNIT into transmitter IR TX; Connect the IR RX UNIT into receiver IR RX.
-
Connect the IR RX UNIT into transmitter IR RX; Connect the IR TX UNIT into receiver IR TX.
* Attention: Please insert and extract cables gently.