The HDMI IR Extender provides extension of HDMI signals long distances over a single CAT6 cable, it supports high resolution up to 1080p and IR signal transmission. The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by its good stability and powerful security.

Features

• Transmits HDMI video and audio signals up to 60m over a single CAT6 cable
• Support video resolution up to 1920*1080@60Hz, 3D signal
• Support reverse direction IR signal transmission
• Support copy EDID function, can auto-match many kind display device
• Compliance with HDMI 1.3 and HDCP 1.2 standard
• High compatibility, can auto-match source and display device
• Built-in automatic adjustment system, make the image smooth, clear and stable
• Built-in ESD protection system
• Simple to install, plug and play

Specification

Video

• Standards: HDMI 1.3; HDCP 1.2
• Maximum pixel clock: 165MHz
• Maximum data rate: 6.75Gbps
• Resolution: 1920X1080@60Hz
• Connector: HDMI-A
• Impedance: 100Ω

IR

• Interface: 3.5mm earphone seat
• Signal direction: Reverse direction
• Signal type: Digital
• IR frequency: 20k-60kHz

UTP

• Interface: RJ45
• Transmission distance: CAT6-60m

Other

• Power supply: The power adapter: DC 5V/1A
• Power dissipation: MAX 3W
• Temperature:Operating: -5℃ ~ +70℃
• Humidity:Operating: 5% ~ 90%
• Dimension: 94.5*71*26mm

Installation

Port name/Description

• HDMI IN/OUT: HDMI signal input/output
• UTP: RJ45 port connect cat5e/6.
• IR IN/OUT: IR signal input/output
• DC IN: Power adapter socket

LED indicator/Description

• PWR: System power indicator
• STATUS: Video signal indicator.
• Copy EDID indicator

1. Connect the HDMI input source (such as HD-DVD, PS3, STB etc. ) to transmitter.
2. Connect a CAT6 cable from UTP port of transmitter to UTP port of receiver
3. Connect the HDMI sink(such as HD-LCD, HD-DLP)to receiver,
4. Connect the transmitter UTP port to the receiver UTP port using a single CAT6 cable.
5. Connect the IR TX UNIT into transmitter IR TX; Connect the IR RX UNIT into receiver IR RX.
6. Power on Transmitter and Receiver.