What makes the Silver C350 so special is the vertical orientation of the mid and tweeter axis which delivers the same directivity as the other speakers in the system. A high percentage of the total sound balance in a theatre system is delivered to the centre channel (typically 60%), so this crucial speaker should not to be overlooked when specifying a high-performance, no-compromise theatre system for the home.
The Silver C350 makes an ideal partner for the Silver 100, Silver 300 and Silver 500 models, being carefully matched to their sonic characteristics.
Features
-
Three-way, four-driver configuration (electrically and acoustically) allows drivers to be optimised to deliver better higher efficiency and lower distortion
-
Sealed cabinet for accurate performance when installed in an A/V cabinet, restricted voids or close to a wall
-
New 25 mm C-CAM, (Ceramic-Coated Aluminium/Magnesium) featuring vented Neo magnet system carefully optimised for lower distortion and cleaner-sounding highs
-
Specially developed 4-inch mid-range driver with ‘under hung’ voice coil and motor system to ensure the voice coil is always in the magnetic gap guaranteeing very low distortion
-
Dual 6-inch bass drivers with ‘dished’ C-CAM cone profile for better damping and improved mid-range clarity
-
RST Cone profile for improved diaphragm rigidity and lower distortion
-
Unique-build ring/voice coil-cone coupling mechanism (DCF) tuned to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity
-
Cast polymer driver chassis design for improved rigidity and damping characteristics
-
Pureflow silver-plated OFC copper internal cabling means the highest-quality transfer
-
High-quality crossovers with premium-grade bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors mean maximum signal transfer
-
Rigid 20 mm MDF construction utilising scientifically optimised cabinet bracing
-
Single bolt-through driver technology provides increased bracing strength, rigidity and driver/baffle de-coupling
-
Ultra-low profile grilles featuring invisible magnetic grille fixings for clean visual styling when fitted
-
Bespoke, high quality bi-wire terminals
-
Selected, premium-quality wood veneers, high-gloss lacquer and contemporary Satin White finishes.
Specification
-
System Format: 3-way
-
Frequency Response (-6 dB): 40 Hz – 35 kHz
-
Sensitivity (1W@1M): 90 dB
-
Nominal Impedance: 8 ohms
-
Minimum Impedance: 3.2 ohms @ 176 Hz
-
Maximum SPL: 113 dBA
-
Power Handling (RMS): 200 W
-
Recommended Amplifier Requirements: 80 – 200 W
-
Bass Alignment: Sealed cabinet
-
Crossover Frequency: LF/MF: 830 Hz | MF/HF: 3.2 kHz
-
Drive Unit Complement:
-
2 x 6” RST bass/mid driver
-
1 x 4” RST midrange driver
-
1 x 1” (25 mm) Gold Dome C-CAM tweeter
-
Cabinet Dimensions (excluding grille and terminals): 235 x 560 x 240 mm
-
External Dimensions (including grille and terminals): 235 x 560 x 270 mm
-
Weight (each): 14.9 kg