The system features two 10 inch low frequency drivers with 2.5 inch voice coils that are both front horn loaded and reflex tuned. The multi-cell horn provides seamless inter-element coupling within the box it self and with the other boxes when cluster stacked.
HF is covered by two 1.75 inch voice coil 1 inch throat HF driver. The polyester annular ring cone makes it able to handle the lower frequency spectrum with much less stress then the standard dome shaped metal diaphragm, but in the same time effortlessly provide the very high frequency sparkle making the HF very smooth sounding.
Specification
-
Usable bandwidth (-3db): 96Hz-20KHz (Axios One DSP settings)
-
Nominal directivity (-6db): Horizontal: 60×40 degree
-
Maximum system SPL: 143db based on 109db 1W/1m box sensitivity (Axios One DSP settings)
-
RMS handling capacity: 800W
-
Recommended amplifier: 800-1200W at 8 ohms per channel
-
Components:
-
LF: 2×10 inch drivers
-
HF: 2×1 inch drivers
-
Crossover frequency: 900Hz
-
Nominal impedance: 8 ohm (16ohm optional)
-
Rigging: M10 flying points
-
Flying hardware accessories available
-
Physical: WxHxD 520x800x600mm, Weight: 42kg
-
Material: Baltic birch plywood
-
Connectors: 2x Neutrik Nl4 Speakon
-
Finish: Black textured water based coating
Notes: MM-acoustics reserves the right to change specifications without prior notice.