WE CONSIDER AS KITS & SET SHELVES:
-
HF & HS Starter Kits: it’s a basilar kit made only of frame & hardware parts able to create a two level rack. The clearance between the shelves vary between 145 mm and 365 mm for the standardized custom lenghts (for other special measures we invite you to contact us by e-mail). Included in this kit there are: A) n. 3 or 4 top caps; B) n. 3 or 4 bottom Hyperspikes; C) n. 3 or 4 top screws; D) n. 3 or 4 bottom screws; E) n. 3 or 4 stainless steel pillars and inner spikes (of the desired dimensions); F) n. 3 or 4 HF/HS Series Pads.
-
HF & HS Add Kits: it’s an additional kit made only of frame & hardware parts able to create a suppletive level on a rack. The clearance between the shelves vary between 125 mm and 345 mm for the standardized custom lenghts (for other special measures we invite you to contact us by e-mail). Included in this kit there are: A) n. 3 or 4 inner screws; B) n. 3 or 4 stainless steel pillars and inner spikes (of the desired dimensions).
NOTE: For the creation of custom lenghts higher than 365 mm it will be necessary to link and screw two stainless steel pillars. That’s because the machineries can’t work entire pillars over that measure. Set of Shelves: each Hyperspike shelf is separated from the frame Kits. These are the various configurations:
-
for the HF Series: A) HF Set Shelves (HF-2 Set Shelves, HF-3 Set Shelves, HF-4 Set Shelves); B) HF Top Shelf; C) HF Inner Shelf. Finishes: flat black, glossy black and glossy white;
-
for the HS Series: A) HS Set Shelves (HS-2 Set Shelves, HS-3 Set Shelves, HS-4 Set Shelves); B) HS Top Shelf; C) HS Inner Shelf. Finishes: flat black, glossy black and glossy white.
Examples:
-
If you need to create an HF-4 in glossy white with the following clearance (mm from the bottom) 285/225/145, then you will need to order: A) HF-4 glossy white Set Shelves; B) HF-StarterKit 285; C) HF-AddKit 225; D) HF-AddKit
-
If you already have a standard HS-2 in flat black and need to add an extra level, then you should order: A) HS Inner Shelf in flat black; B) HS-AddKit (of the desired measure).
Technical Specifications
Please, for the technical specifications check the other products from this Series.
Related Technical Contents
Take a look to our eventual dedicated Special Kits for the product’s customizations or simply consult other articles from the same Series that might be also interesting.