HF section consists of one 1.75 inch voice coil annular diaphragm driver with 1 inch exit, coupled to a proprietary high frequency wave guide and horn assembly that provides seamless inter-element coupling.
The box configuration generates a symmetrical 90 degree horizontal coverage with no apparent lobes in its entire frequency range.
Each of the system elements can be curved up to 16 degrees without breaking the inter-element acoustic coupling.
M26LA line source element is made of premium grade Baltic birch plywood to provide maximum acoustical and mechanical integrity.
Each element has a nominal 16 ohm impedance and the system is driven by a dedicated amplifier and DSP units as a fully integrated system which provides clean undistorted power with a significant headroom and excellent system protection.
Specification
-
Usable bandwidth (-3db): 70Hz-20KHz (M26LA DSP settings)
-
Nominal directivity (-6db): Horizontal: 90 degree symmetrical. Vertical: Deployment dependant.
-
Maximum system SPL (Peak): 145db (M26LA DSP settings) calculated for 4 boxes based on 98.5db 1W/1m sensitivity per element.
-
RMS handling capacity: LF: 600W AES per element. HF: 80W AES per element.
-
Maximum recommended power per element: 1200W
-
Components:
-
LF: 2×6 inch 2.5 inch voice coil with water resistant cone.
-
HF: 1×1 inch exit, 1.75 inch voice coil, annular diaphragm compression driver
-
Nominal impedance: Passive 16ohm
-
Rigging: Polyester powder coated steel. Angle increments: 0,1,2,4,6,8,10,12,14,16
-
Physical: WxHxD 580x215x350mm, Weight: 19kg
-
Material: Baltic birch plywood.
-
Connectors: 2x Neutrik Nl4 Speakon
-
Finish: Black textured water based coating