SPECIFICATION

Turntable section

• Drive System: Belt Drive
• Motor: DC Motor
• Speed: 33 1/3 RPM, 45 RPM
• Rotation Speed Variation: +/–2%
• Wow and Flutter: 0.2%
• Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF), 60dB or higher (unweighted, 20kHz LPF)
• Platter: Aluminum Die-cast
• Diameter of Platter: 12", 300mm

Tonearm section: Alumi tube

• Type: Static Balance, Straight
• Effective Arm Length: 8.8", 223.6mm
• Stylus Pressure Range: 0 to 4g
• Supported Cartridge Weight: 3.5 to 6.0g
• Overhang: 18.6mm
• Anti-skating Adjustment: Supported

Cartridge section

• Type: MM type (Audio-Technica AT3600)
• Stylus Construction: Bonded Diamond
• Frequency Response: 20Hz to 20kHz
• Channel Separation: >18dB
• Channel Balance: 2.5dB
• Vertical Tracking Angle: 20 degrees
• Supported Load Impedance: 47k ohms
• Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure: 3.5g +/–0.5g
• Cartridge Weight: 5g +/–0.5g
• Head-shell Weight: 10g (including Screws, Nuts and Wires)

Analog Output

• Connector: RCA Pin jack (Gold-plated)

Power

• Power: AC 100 to 240V, 50/60Hz
• Power Consumption: 1.5W (less than 0.5W at Standby)

Overall Dimensions: (W x H x D):420 x 355x 121mm

Weight: Approx. 3.9 kg

SPECIAL FEATURES
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.