Q4 is a one-way passive enclosure with a smooth tonal response free of secondary lobes over the entire frequency range. Housed in a cabinet made of laminated first grade Baltic birch plywood with unique internal wall shaped in a way to minimize internal sound reflection.

The combination of minimalist dimensions, flexible accessories and its naturall wood external finish makes it a perfect choice for installations in rooms with natualar wood interior.

On its own, Q4 is an ideal complement to larger systems in venues that require seamless integration in the smallest spaces such as theaters, houses of worship, corporate facilities and studios.

Supplementedby a subwoofer, Q4 is also perfect as a distributed background music system, indoor or outdoor, in bars, restaurant, conference rooms, museums and other venues.

Specification

• Usable bandwidth (-10db): 100Hz-18KHz (Q4 DSP seƫngs)
• Nominal direcƟvity (-6db): 110x110
• Maximum system SPL: 115db
• Power handling capacity: 70W AES, 140W program, 280W peak
• Recommended amplifier power: *70-120W at 8 ohms
• Components: Custom 4 inch full range driver
• Nominal impedance: Passive 8ohm
• Rigging: 2 M8 flying points and U bracket
• Physical: WxHxD 130x130x130mm, Weight: 1.9kg
• Material: BalƟc birch plywood. Connectors: 1x Neutrik Nl4 Speakon
• Finish: Clear natural wood

* Program power is calculated as 3db higher then the AES power. Note that most of the modern electronic music does not allow high dynamics. For compressed music material we do not recommend using more then 120W of clean not clipped signal with 100hz 24db BW high pass filter applied.

Trade Descriptions Act:
Due to MM-acoustics policy of continuing improvement, we reserve the right to alter these specifications without prior notice. MM-acoustics is committed to refining state of the art sound reinforcement, combining in-depth product and field applications research with advanced manufacturing techniques. Every MM-acoustics product is built to the highest manufacturing standards and rigorously tested to ensure that it meets the performance criteria specified in the design.