Features
Bluetooth 5.0 LDAC transmission
DX3 Pro have the certification of Hi-Res Audio Wireless and LDAC,it uses CSR8675 chipset to support LDAC/AAC/SBC/aptX/aptX /aptX-HD protocol.To get even better sound quality of Bluetooth,we abandon the built-in DAC of CSR8675 and connect it's digital signal to 2*AK4493 to decode.
Bluetooth headphone amp/Bluetooth receiver application
You can connect your phone, ipad, or laptop to DX3 Pro by Bluetooth, and then you can use a headphone to listen to the high quality music. Or you can connect DX3 Pro' s RCA output to let it served as a high quality Bluetooth receiver.
DX3 Pro's USB input is able to compatible with Android and lOS, no matter phone or pad, DX3 Pro's DA will bring much better sound to you.
*The Android devices are required to support OTG USB sound card. The IOS devices are required to use special DAc cable or camera kit to connect.
DAC+ Preamplifier application
If you have need DX3 Pro cooperate with an amplifier or active speakers, you can set output mode of it to be preamplifier, then you can decode and adjust volume in DX3 Pro. The remote of it will help your operate more easily.
DAC application
When you only need a simple DAC, you can set DX3 Pro's output mode to be DAC, then it could served as a simple DAC,screen will display current sampling rate and volume will keep outputting 2Vrms.
Specification
-
Measured: 12.0cm xX 16.5cm x 4.0cm
-
Weight :400g(Unit only)
-
Power input :DC15V/1A
-
Colour:Full black/Full silver
-
Input :USB/OPT/COAX1/COAX2/BT
-
Line Out output : RCA
-
Headphone amp output : 3.5mm
-
USB IN : 44.1kHz-768kHz/16bit-32bit,DSD64-DSD512(Native),DSD64-DSD256(DOP)
-
OPT/ COAX IN :44.1kHz-192kHz/16bit-24bit
-
BT IN :AAC/SBC/APTX/APTX-LL/APTX-HD/LDAC