In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.

The fully RDM-enabled PixBar 500 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.

The aluminium housing of the Cameo PixBar 500 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.

Features

• 6 ultra-bright 12 W RGBWA+UV LEDs
• Single Pixel Control for effective Chase effects
• Silent operation thanks to convection cooling
• Flicker-free
• Professional 3- and 5-pin DMX sockets and Neutrik powerCon mains connector
• Fully RDM-enabled
• 7 DMX modes plus operation as a standalone, master or slave
• Frost filter for uniform, glare-free light
• 4 adjustable dimmer curves
• Colour temperature correction
• 3 preset shades of white: warm white, cool white, white
• Sturdy aluminium housing

Specification

• Product type :LED Bars
• Type :Indoor
• Colour spectrum :RGBWA+UV
• Number of LEDs :6
• LED type :12 W
• Dispersion :(1120 lx) 41 °, (600 lx) 23 °
• Refresh rate :3000 Hz
• DMX input :XLR 3-pin male, XLR 5-pin male
• DMX output :XLR 3-pin female, XLR 5-pin female
• DMX mode :12-channel, 2-channel, 38-channel, 42-channel, 6-channel 1, 6-channel 2, 8-channel
• DMX Functions :Auto programs, colour macro, Colour temperature correction, Dimmer, Single Pixel Control, sound programs, strobe
• Standalone modes :Auto programs, sound programs, static colour, strobe
• Controls :Enter, Mode, Value Down, Value Up
• Indicators :LC display
• Operating voltage :110 V AC - 240 V AC / 50 – 60 Hz
• Power consumption :90 W
• Power connector :Neutrik PowerCon
• Housing material :Die-cast aluminium
• Cooling :Convection
• Cabinet colour :Black
• Illuminance :1190lx @ 1m
• Dimensions without mounting bracket
• Width :450 mm
• Height :120 mm
• Depth :75 mm
• Dimensions of the mounting bracket (incl. rubber feet) :380 x 140 x 100 mm
• Weight :4 kg