The XR2064 is a constant directivity 2 inch horn. The XR2064 has been developed to reach the optimum performance when coupled to 2 inch exit Eighteen Sound high frequency compression drivers.
All XR series horns have been designed in order to reach smooth driver frequency response, to maintain constant coverage and directivity and eliminating the midrange narrowing and high frequency beaming problems common of many similar horns on the market.
XR2064 is made in low pressure injected aluminum in order to obtain the best performance in following aspects:
- thermal: aluminum horns are capable to reduce up to 30°C the steady state compression driver working temperature at full power, when compared to equivalent size plastic horn. This gives lower power compression ratio (down to 1dB) and higher driver power handling (30% higher);
- mechanical: aluminum horns do not require any support for the compression driver (likes brackets), and at the same time eliminate the problem of horn resonance with optimum waterfall and impulse system behavior.
The XR2064 horn maintains nominal 60° Horizontal x 40° Vertical pattern control. It provides consistent on-axis and off-axis frequency response from 1.2kHz to 16kHz in both horizontal and vertical planes.
Horn directivity is constant down to 1.2kHz.

2 inch throat entry
Aluminum construction for excellent heat transfer
Uniform on-axis and off-axis frequency response
60° x 40° horizontal and vertical constant coverage
Very low distortion at high sound pressure
Improved compression driver cooling
Rotatable structure