APB-D200 R-D ACTIVE 2 CH DANTE 19" RACK DRIVE UNIT

Home PA Systems Audio Splitters APB-D200 R-D ACTIVE 2 CH DANTE 19" RACK DRIVE UNIT

Product number: 165535

Active 19” rack AudioPressBox distribution Drive Unit, Dante Interface - 2 channels, 2 LINE Inputs, 4 buffered Outputs for 12 AudioPressBox expanders

APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network. As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

151,300.00 ден

Inc. VAT

Out of stock

Qty.

Add to cart

Share via:

APB-Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

PoE Power Consumption: < 2 Watt

CAUTION– If using a PoE injector, it must be IEEE 802.3af compliant. Use of a non-compliant PoE injector can terminally damage the device and may void the warranty.

Available Software Options:

Dante Controller
Dante Via
Dante Virtual Soundcard

Professional active 19'' rack AudioPressBox Drive unit • DANTE interface - 2 channels • 2 balanced LINE Inputs • Switchable High-Pass filter • Switchable Compressor and Limiter for Input channel • 4 separately buffered Outputs for 12 AudioPressBox 8-output expanders.

Drive unit for : APB-008 SB-EX, APB-008 IW-EX, APB-008 OW-EX, APB-008 FB-EX, APB-024 R-EX, APB-P008 OW-EX, APB-P008 IW-EX

Features

Professional active 19” rack AudioPressBox Drive unit
DANTE interface - 2 channels
2 Channels (balanced LINE Input / DANTE)
Switchable High-Pass filter for for each Input channel
Switchable Compressor and Limiter for for each Input channel
4 separately buffered Outputs (2 for each channel) that can drive 6x APB-008 or 2x APB-024 Output expanders.
Maximum drive capacity 96 Line or Mic Outputs.

Specification

Type	2 Line/DANTE input channels 4 Drive OUT for 12xAPB 8-Output expanders or 4xAPB 24-Output expander Note: Total capacity: 96 Line/Mic outputs (12x APB-008 xx-EX or 4x APB-024 R-EX)
Groups	2
Input section
Inputs	2 LINE / 2 DANTE
Input connectors	Balanced, XLR, RJ45 - DANTE
Max. input level	Line: +32/+2dBu
Input Impedance	>5kOhm
Output section
Outputs	4 separately buffered, balanced outputs for AudioPressBox expanders
Output connectors	Balanced, XLR
Nominal Output Level	+6 dBu
Maximum Output Level	+20dBu with 48 Outputs in use +16dBu (600kOhm)
Output impedance	Mic: 220 Ohm	Line: 600 Ohm
Transformer isolated outputs:	Yes (each EXPANDER output is Independent Transformer Isolated)

SNR	86dB at 0dB Gain 78dB at +20dB Gain
Frequency Response	30/160Hz (ﬁlter) to 60kHz/-1dB
Controls	Input gain, Compressor and Limiter, High Pass Filter, Power
Indicators	Input clip, Output level, Gain reduction, Power
Power Supply	24V DC, 300mA external adaptor