AUDIO EXTENDER PASSIVE RCA ST OVER CAT5/6 1000m LT

Product number: 167708

Analog Stereo HI-FI RCA Audio Extender Over UTP Cat5e/6

The Stereo HI-FI RCA Audio Extender Over Cat5e/6 allows one Analog Stereo Hi-Fi R/L Audio to be transmitted over Cat5e/6 Cable up to 3250ft (1000m) in a point-to-point connection. It has built in surge suppressor to protect audio equipment against damaging voltage spikes. It has integrated ground loop isolation that prevents annoying "hum-bars" common noise with long distance installations.

4,850.00 ден

Inc. VAT

Out of stock

Qty.

Add to cart

Share via:

The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required. Used in pairs, the Stereo Hi-Fi Audio Extender eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment. Mainly applicated for boardroom systems, classroom training, auditoriums, custom home installations and intercom systems.

1 Channel Stereo Audio up to 3250ft(1000m) Via Cat5e/6
20 Hz to 20 KHz bandwidth
Full ground-loop immunity in audio
Built in TVS for surge protection
Audio Inputs support line level unbalanced Audio
Quick move, add and change of the device

Setup Guide

Plug the Left (White) and Right (Red) Stereo Audio RCA connectors of the transmission device into the HI-FI Audio output of the source audio equipment.
Plug the Left(White) and Right (Red) Stereo Audio RCA connectors from the receiving device into your desired input of the destination audio equipment.
Insert the CAT5eor CAT6 cable into both ends of the transmission and receiving devices. You may use standard EIA 568A/B Termination.

Specification

3dB Bandwidth; 20 Hz to 20 KHz over the distance range
Maximum Input: 1.1Vp-p
Insertion Loss per device pair: Less than 2 dB over the frequency range
Common Mode Rejection:
- Greater than 60 dB @ 1KHz
- Greater than 40 dB over the frequency and distance range
THD: Maximum 0.007% @ 1 KHz over distance range
Audio Source Impedance: 100 Ω maximum
Audio Receiver Impedance: 10 kΩ minimum
Max. Distance Cat5e/6 UTP: 3250ft (1,000m)
Pin Configuration (RJ45) EIA 568 A or B:
- Audio 1 (White): pins 1[R] & 2 [T]
- Audio 2 (Red): pins 7 [R] & 8 [T]
Cable UTP: 24AWG or lower solid copper twisted pair wire, Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHz
Connectors: Two RCA-F connectors for audio: white red | RJ45 for twisted pair
Temperature: Operating: 0° to 55°C | Storage: -20° to 85°C | Humidity: Up to 95% non-condensing
Dimensions (packaging): 155*80*30mm (including one pair of Balun)
Weight(packaging): 300g