The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required. Used in pairs, the Stereo Hi-Fi Audio Extender eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment. Mainly applicated for boardroom systems, classroom training, auditoriums, custom home installations and intercom systems.
-
1 Channel Stereo Audio up to 3250ft(1000m) Via Cat5e/6
-
20 Hz to 20 KHz bandwidth
-
Full ground-loop immunity in audio
-
Built in TVS for surge protection
-
Audio Inputs support line level unbalanced Audio
-
Quick move, add and change of the device
Setup Guide
-
Plug the Left (White) and Right (Red) Stereo Audio RCA connectors of the transmission device into the HI-FI Audio output of the source audio equipment.
-
Plug the Left(White) and Right (Red) Stereo Audio RCA connectors from the receiving device into your desired input of the destination audio equipment.
-
Insert the CAT5eor CAT6 cable into both ends of the transmission and receiving devices. You may use standard EIA 568A/B Termination.
Specification
-
3dB Bandwidth; 20 Hz to 20 KHz over the distance range
-
Maximum Input: 1.1Vp-p
-
Insertion Loss per device pair: Less than 2 dB over the frequency range
-
Common Mode Rejection:
-
Greater than 60 dB @ 1KHz
-
Greater than 40 dB over the frequency and distance range
-
THD: Maximum 0.007% @ 1 KHz over distance range
-
Audio Source Impedance: 100 Ω maximum
-
Audio Receiver Impedance: 10 kΩ minimum
-
Max. Distance Cat5e/6 UTP: 3250ft (1,000m)
-
Pin Configuration (RJ45) EIA 568 A or B:
-
Audio 1 (White): pins 1[R] & 2 [T]
-
Audio 2 (Red): pins 7 [R] & 8 [T]
-
Cable UTP: 24AWG or lower solid copper twisted pair wire, Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHz
-
Connectors: Two RCA-F connectors for audio: white red | RJ45 for twisted pair
-
Temperature: Operating: 0° to 55°C | Storage: -20° to 85°C | Humidity: Up to 95% non-condensing
-
Dimensions (packaging): 155*80*30mm (including one pair of Balun)
-
Weight(packaging): 300g