Audio |
Frequency response |
20 Hz to 20 kHz, ±0.3 dB |
THD + Noise |
<0.01% @ 1 kHz, at maximum level |
S/N |
Analog to digital |
>95 dB, 20 Hz to 20 kHz, at full-scale output, unweighted |
Digital to analog |
>95 dB, 20 Hz to 20 kHz, at maximum balanced output, unweighted |
Crosstalk |
<-90 dB @ 1 kHz, fully loaded |
|
Audio input |
Number/signal type |
2 mono, mic/line, balanced/unbalanced |
Connectors |
2 female XLR connectors, 3-pin |
Impedance |
>10k ohms unbalanced/balanced |
Nominal level |
+4 dBu when level is set to 0 dB gain; adjustable from -60 dBu to +4 dBu |
Maximum level |
>+21 dBu at rated THD+N when input gain is set to 0 dB |
Noise level |
<-120 dBV (1 µ Vrms) at 45 dB gain |
Input gain adjustment (mic) |
0 dB to +45 dB, adjustable per input in 5 dB steps |
CMRR |
>65 dB @1 kHz |
Mic phantom power |
+48 VDC ±10%. Can be switched on or off. |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output |
Number/signal type |
2 mono (or 1 stereo), balanced/unbalanced |
Connector |
(1) 3.5 mm captive screw connector, 6 pole |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Nominal level |
-10 dBV or +4 dBu (1.23 V) |
Maximum level (Hi-Z) |
>+15 dBu balanced or >+9 dBu unbalanced |
|
Audio processing |
A/D conversion |
24 bit, selectable sampling rate |
|
AT ports — audio transport |
Transmission type |
Dante |
Connector |
(1) RJ-45 to Dante interface |
Inputs |
2 channels Rx |
Outputs |
2 channels Tx |
Audio format |
24 bit uncompressed, selectable at 44.1, 48, 88.2, and 96 kHz sampling rate |
Latency |
Deterministic, based on user selections: 1.0 ms (default), 2.0 ms, 5.0 ms |
|
General |
Power input requirements |
12 VDC or Power over Ethernet (PoE 802.3at) |
Power supply (optional) |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
Power consumption |
|
Device |
4.5 watts |
Device and power supply |
5.9 watts |
Power injector (PoE) — XTP PI 100 |
Power consumption |
|
Device |
5.3 watts |
Device and power injector |
8.3 watts |
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling |
Convection, no vents |
Thermal dissipation |
|
Power supply (optional) |
|
Device |
12.0 BTU/hr |
Device and power supply |
16.6 BTU/hr |
Power injector (PoE) — XTP PI 100 |
Device |
14.6 BTU/hr |
Device and power injector |
25.1 BTU/hr |
Furniture or wall mount |
Yes, with 1-gang wall box or mud ring |
Enclosure type |
Metal |
Faceplate dimensions |
2.6" H x 1.3" W x 0.3" D
(6.6 cm H x 3.3 cm W x 0.6 cm D)
(Depth excludes connectors.) |
Device dimensions |
2.6" H x 1.7" W x 2.2" D
(6.6 cm H x 4.3 cm W x 5.6 cm D)
(Depth excludes connectors.) |
Product weight |
0.3 lbs (0.1 kg) |
Shipping weight |
1 lbs (1 kg) |
DIM weight, international |
0.6 lbs (0.3 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
Warranty |
3 years parts and labor |
NOTE |
All nominal levels are at ±10%. |
|
NOTE |
Specifications are subject to change without notice. |
|
(8.1-010516-D7) |