The IS1112 is the perfect solution for providing high quality low-end response in systems where space restrictions or the need for unobtrusive audio distribution means that five and eight inch full-range speakers, such as the IF2205, IF2108 and IF2208 models, are used for primary delivery.
Providing a seamless, naturally extended low-end response, the IS1112 features 2,800 watt peak output with a remarkably high 127dB peak sound pressure level, thanks to a 4" voice coil which offers superior reliability, power handling, and response.
Connection to amplifiers is very straightforward, with input via Neutrik NL4 and barrier strip connectors. In addition, a full range cabinet can be fed from an output socket on the IS1112 when the convenient loop-through wiring is used. Both full range and subwoofer signals can be fed to the input via a single four wire Speakon cable, meaning no special cross-over cable is needed.
Twelve M10 suspension points make flying the IS1112 extremely simple, while a 35mm (13/8") pole socket on the top surface allows for straightforward installation in a wide variety of permanent or temporary situations. Ease of handling is aided by the inclusion of attachable rubber feet and integral handles, making the IS1112 equally at home in live sound applications as well as for installation.
Finished in durable black or white textured paint, the IS1112 can also be painted to match the decor of any venue in which it is installed, meaning architects and interior designers are as happy as the listener!
Features
-
The perfect way to achieve naturally extended low-end response in systems that use smaller IS series full-range models for primary delivery.
-
Significantly smaller than competing 12” subwoofers, while delivering outstanding sonic performance and reliability.
-
2800 watt peak input capacity with high 127 dB sound pressure level output.
-
Large 4” voice coil for superior reliability, power handling, and response.
-
Direct connection to full-range units without the need for special speaker cables.
-
Flexible installation and handling: 12 x M10 rigging points, two handles, and pole socket*.
*Please refer to the precautions on the Owner's Manual when using the pole socket.
-
Vibration damping rubber feet supplied
-
Durable black or white exterior finish
Specification
-
Speaker type 12" subwoofer
-
Frequency range (-10dB) 45Hz-2kHz
-
Frequency response (-3dB) 55Hz-500Hz
-
Components LF 12" (30cm) woofer, 4" (100mm) voice coil
-
Power rating NOISE 700W (AES)
-
PGM 1400W
-
PEAK 2800W
-
Nominal impedance 8ohms
-
SPL Sensitivity (1W; 1m on axis) 93dB SPL
-
Continuous (Calculated) 121dB SPL
-
Peak (Calculated) 127dB SPL
-
I/O connectors Input: 1x Neutrik NL4 and barrier strip, wired in parallel; Output: 1x Neutrik NL4
-
Shape Rectangular
-
Cabinet material 5/8 inch (16mm), 11-ply Finnish birch
-
Finish Textured black
-
Handle 2
-
Flying and mounting hardware 12x M10 for shoulder eyebolts
-
Pole socket 1x 35mm (1-3/8in)
-
Dimensions W 378mm; 14-7/8in
-
H 394mm; 15-1/2in
-
D 454mm; 17-7/8in
-
Net weight 24kg; 52.9lbs